My new turbo Kat project

by **FBJ admin** » Thu Aug 29, 2013 3:15 pm

More spacers from Sam. Huge thanks

by **FBJ admin** » Sat Sep 14, 2013 1:06 pm

Hi all just want to rack your brains. I brought some bandit stuff a yr or two back. The spacers etc for rear wheel alignment were missplaced whilst the frame was getting sorted. So brought some new ones from Robinsons. The wheel is in and fits nice but its several mm to the left. Its supposed to be a 1200 bandit arm. Hanger. Cush drive and spacers. I just got another hanger and spacers for a 1200 bandit and they are the same. What ya all think. Heres pics of the parts

by **FBJ admin** » Sat Sep 14, 2013 1:06 pm

Another

by **FBJ admin** » Sat Sep 14, 2013 1:07 pm

Another

by **FBJ admin** » Sat Sep 14, 2013 1:08 pm

The wheel to the left

by **FBJ admin** » Sat Sep 14, 2013 5:55 pm

Managed to do abit today. Had this pipe machined to suit od of link pipe

by **FBJ admin** » Sat Sep 14, 2013 5:56 pm

I used a cable tie to ensure the pipe was cut square

by **FBJ admin** » Sat Sep 14, 2013 5:57 pm

The cut worked out great, 17mm slug.

by **FBJ admin** » Sat Sep 14, 2013 5:58 pm

So now you can see the link pipe is the right length.

by **FBJ admin** » Sat Sep 14, 2013 6:00 pm

This is where the 17mm slug is. Will be nice when cleaned up. Had to use mig as i aint got tig.