Page 1 of 2
Does the katana 750 clutch case fit the EF?
Posted:
Mon Jan 14, 2013 12:43 pmby Nickel
Does the katana 750 clutch case fits on my gsx1100EF engine?
- clutch case.jpg (30.64 KiB) Viewed 13401 times
Re: Does the katana 750 clutch case fit the EF?
Posted:
Mon Jan 14, 2013 3:24 pmby Pedda
The 7.5 and the 11 Kat clutch cover are physically the same. So I think they should also fit the EFE engine.
Somebody to confirm?
Re: Does the katana 750 clutch case fit the EF?
Posted:
Mon Jan 14, 2013 6:49 pmby Nickel
I hope so.
Need one with the bigger oil inlet cap on my EF engine.
Anybody else with experience in that?
Re: Does the katana 750 clutch case fit the EF?
Posted:
Mon Jan 14, 2013 7:15 pmby DEANOTEK
Yep.. clutch casing should fit... but the generator casing is different.
Re: Does the katana 750 clutch case fit the EF?
Posted:
Mon Jan 14, 2013 7:56 pmby Nickel
Perfekt. Thanks for that. Generator cover is not the problem.
Got a connector wih the turbo kit that fits the oil filler cap of the clutch case. Would like to use it.
Re: Does the katana 750 clutch case fit the EF?
Posted:
Tue Jan 15, 2013 5:29 amby Nickel
Ok, if nobody knows it for sure, I'll try it.
Re: Does the katana 750 clutch case fit the EF?
Posted:
Sat Jan 19, 2013 5:56 pmby Nickel
And here's the answer: It doesn't fit.
Looks very similar, but it's slightly different.
- top.jpg (36.78 KiB) Viewed 13365 times
- bottom.jpg (31.88 KiB) Viewed 13365 times
- bottom left.jpg (35.77 KiB) Viewed 13365 times
Re: Does the katana 750 clutch case fit the EF?
Posted:
Sat Jan 19, 2013 6:39 pmby DEANOTEK
Well thats a bugger then... cos i've got a spare one for my 1100 somewhere... DOH.!!!
Re: Does the katana 750 clutch case fit the EF?
Posted:
Sat Jan 19, 2013 7:05 pmby dago
if i remember right the gsx 1100 not efe had biger oil filler there's one on ebay it looks bigger than efe one you could ask seller to measure it to make sure
Re: Does the katana 750 clutch case fit the EF?
Posted:
Sun Jan 20, 2013 8:47 amby Nickel
I think gsx and katana casings are the same. So I don't think that the early gsx casing will fit the EFE engine. But to know for sure I'll try it.