Does the katana 750 clutch case fit the EF?

by **Nickel** » Mon Jan 14, 2013 12:43 pm

Does the katana 750 clutch case fits on my gsx1100EF engine?

: clutch case.jpg (30.64 KiB) Viewed 13400 times

by **Pedda** » Mon Jan 14, 2013 3:24 pm

The 7.5 and the 11 Kat clutch cover are physically the same. So I think they should also fit the EFE engine.

Somebody to confirm?

by **Nickel** » Mon Jan 14, 2013 6:49 pm

I hope so.
Need one with the bigger oil inlet cap on my EF engine.

Anybody else with experience in that?

by **DEANOTEK** » Mon Jan 14, 2013 7:15 pm

Yep.. clutch casing should fit... but the generator casing is different.

by **Nickel** » Mon Jan 14, 2013 7:56 pm

Perfekt. Thanks for that. Generator cover is not the problem.
Got a connector wih the turbo kit that fits the oil filler cap of the clutch case. Would like to use it. ;-)

by **Nickel** » Tue Jan 15, 2013 5:29 am

Ok, if nobody knows it for sure, I'll try it.

by **Nickel** » Sat Jan 19, 2013 5:56 pm

And here's the answer: It doesn't fit.
Looks very similar, but it's slightly different.

: top.jpg (36.78 KiB) Viewed 13364 times

: bottom.jpg (31.88 KiB) Viewed 13364 times

: bottom left.jpg (35.77 KiB) Viewed 13364 times

by **DEANOTEK** » Sat Jan 19, 2013 6:39 pm

Well thats a bugger then... cos i've got a spare one for my 1100 somewhere... DOH.!!! :roll:

by **dago** » Sat Jan 19, 2013 7:05 pm

if i remember right the gsx 1100 not efe had biger oil filler there's one on ebay it looks bigger than efe one you could ask seller to measure it to make sure

by **Nickel** » Sun Jan 20, 2013 8:47 am

I think gsx and katana casings are the same. So I don't think that the early gsx casing will fit the EFE engine. But to know for sure I'll try it. ;-)