AirCooledSuzuki

Hi all, i want to fit my draw thru to my trick efe for a while, Roger upperton has ordered some high flow oil pump gears for me, he suggested removing the oil pressure switch and taking the feed for the turbo from there, I'm happy to do that, however i still want a working oil pressure light, any ideas?
I will just ren the drain to the clutch case cover

Thoughts appreciatted.

Hi.. i might still have my original billet Mr Turbo oil feed.. i think that still uses the oil pressure switch... will try to dig it out for you, if you are interested...it was modified too, to run oil feeds to the top end. Deano.

Yes please mate

Here's a pic.. of it fitted.

Yeah if you can find it let me know how much mate

Ive dug it out of my goodies box,.. these are normally items i keep & dont sell... is £60 ok ,i will pay p&p.. i know these are very hard to come across, & are expensive being an original Mr Turbo part.
I've also got an original Mr Turbo glycerine filled boost gauge,..its in very good condition, looks new,.. black faced with Mr Turbo logo, chrome bezel... with the billet alloy mounting bracket it sits in,. (Hens teeth & expensive, i've never ever dropped across one for sale, much better than those shite white faced cheap ones)..I'd sell this for £80..p&p included .(Turned down £100 last year ).
Like i've said, ..these are items i normally keep,.. im an hoarder when it comes to bolt on goodies, .... but i want some new speakers for my stereo system.. . boo hoo !!!

any chance of a close up photo as would be good to see it and look into making one

Does the oil feed still use the pressure switch? If so can u request £60 from me i will pm you my paypal address. With regards to the guage. Can u mail me a pic. If i like it will have it after the 22nd

Yes the Mr Turbo oil take off still uses the standard oil pressure switch, you just screw in your Suzuki one into the to & away you go. If you want to blank off the top end oil feed hole, its a 10mm x 1.00mm thread. I've screwed a double banjo bolt into it for you, & screwed an adaptor in the turbo oil feed hole, so you can plumb a #6 fitting on to it to feed the turbo.
If you dont want the gauge no prob.. i'd rather keep it anyway.. but those speakers are calling... so i might advertise it on ebay etc.
My email address is.. deanotekpower@tiscali.co.uk for paypal.
All the best Deanotek.

TBH i would not run cam feeds from the same place as the turbo feed........"I killed one that way"

If John dont take the Mr Trubo gauge and bracket i,ll have it please....££ waiting...