oilcooled engine in EFE frame
Posted: Thu Dec 06, 2012 8:07 am
The bottom rear mounts (3rd pic) should be 10mm longer, 46mm should be 56mm.
The bottom rear mounts (3rd pic) should be 10mm longer, 46mm should be 56mm.
AirCooledSuzuki
A forum for fans of Air Cooled Suzuki motorcycles
https://aircooledsuzuki.co.uk/
oilcooled engine in EFE frame
Page 1 of 2
Posted: Thu Dec 06, 2012 8:07 amThe bottom rear mounts (3rd pic) should be 10mm longer, 46mm should be 56mm.
Re: oilcooled engine in EFE frame
Posted: Thu Dec 06, 2012 8:58 amNice one Joris....
Anybody got the same for the ET / ES frames.... or do we think these should be the same? what with the ET & EFE mounts being the same???
Anyone confirm for sure??
Dave
Anybody got the same for the ET / ES frames.... or do we think these should be the same? what with the ET & EFE mounts being the same???
Anyone confirm for sure??
Dave
Re: oilcooled engine in EFE frame
Posted: Thu Dec 06, 2012 8:42 pmI'd be very interested in drawings for an 1100 Gsxr/1100ET conversion too!
Re: oilcooled engine in EFE frame
Posted: Fri Dec 07, 2012 8:47 amThink Warp Speed Racing sell a kit to do just this job 
JOnboy
JOnboy
Re: oilcooled engine in EFE frame
Posted: Sun Dec 09, 2012 4:38 pm4mm thick looks very thin for these???? Is the figure correct?
Re: oilcooled engine in EFE frame
Posted: Sun Dec 09, 2012 6:00 pmdixiethedog wrote:4mm thick looks very thin for these???? Is the figure correct?
original EFE ones are 4mm (welded on frame) and 4,5mm (removeable ones).
I made mine 5mm (all of them)
Re: oilcooled engine in EFE frame
Posted: Thu Dec 27, 2012 8:29 pmMozza wrote:I'd be very interested in drawings for an 1100 Gsxr/1100ET conversion too!
like this?
Re: oilcooled engine in EFE frame
Posted: Thu Feb 21, 2013 4:33 pmIm sure the diagrams for the rear engine mounts were wrong when they were published on OSS ages ago? Can anybody confirm this for me?
Im going to make some up,but dont want the fuss of having to pull a frame out,stick an engine in,measure,take engine out etc...
Id like to make bracketry so that when Im ready I can fit an engine in double quick time.
Im going to make some up,but dont want the fuss of having to pull a frame out,stick an engine in,measure,take engine out etc...
Id like to make bracketry so that when Im ready I can fit an engine in double quick time.
Re: oilcooled engine in EFE frame
Posted: Thu Feb 21, 2013 4:50 pmIf memory serves me right the weld on two were wrong
Re: oilcooled engine in EFE frame
Posted: Thu Feb 21, 2013 7:46 pmFBJ admin wrote:If memory serves me right the weld on two were wrong
yes the bottom rear mounts should be 10mm longer