AirCooledSuzuki

This is my mate Harrys 1100EZ.. Hes owned it about as long as i've owned my Kat.. 22 years... Maybe slightly longer.
In july he wanted me to fit some bigger wheels in it, but he wanted to keep the standard forks, as he didnt want to go too much over the top with the modifications.
I fitted a GSX750F front wheel & discs, & made some adaptor plates to fit the front calipers too. I had to take 2mm off both sides of the wheel where the discs fit, & 1.5mm off the discs to get the required clearance.. (discs to inside of the forks clearance)...New spacers were made up too.
The rear wheel is a 4.5" gsxr item... & i had to take 8mm off the rear sprocket carrier face, to get the chain alinement spot on. New spacers were knocked up too.
He was well impressed with the finished job.

It's err, being modified!

Couple of nice bikes there guys. Are 750 et footpeg hangers the same as 1100et ones. Deanotec. Tip for the future. Gs500 cushdrives fit the 4,5" rim. Used it in the wifes 1100sz with stock swingarm. Ur mates ez is tidy

not sure i have any pics but used to really enjoy my old EZ, re-apinted in "Calibra Yellow" after some twonk did the usual "sorry mate DNSY"..........
had a nice little EF motor edged in, rearsets and Jota bars, etc............you could literally lie on the tank bag on a trip and snooze down the road

My old GS/GSX basking in the sunshine at Tongue North Scotland

This little lovely is stunning

This is also well sweet

I like these moto martins

Strangewayz 7/11 i love it

Nearly 30 years difference in age...and he struggles to keep up with me . Ok Perhaps not!