EFE offset sprocket

by **Flufflonsdale MOD** » Thu Mar 07, 2013 8:18 pm

I need an offet front sprocket for an EFE with a 1200 Bandit rear wheel. Running a 530 pitch Chain.Thanks

by **FBJ admin** » Thu Mar 07, 2013 8:43 pm

Debben do them bud

by **Flufflonsdale MOD** » Thu Mar 07, 2013 8:53 pm

Cheers John, was hoping to get one a little cheaper if poss!

by **FBJ admin** » Thu Mar 07, 2013 8:58 pm

Wbat about buying two normal 530 sprockets. Have the teeth machines of one. Then weld the two together. Need to be careful with spline alignment

by **Sweary Bob** » Sat Mar 09, 2013 3:13 pm

Trident Engineering at Silverstone had the best prices last time I looked.
http://www.silverstonesuperbikes.co.uk/ ... ts_14.html

by **Kevstar_0** » Sun Mar 17, 2013 12:02 pm

Now then what size sprockets are you useing ?? Bud

by **Duckndive** » Sun Mar 17, 2013 5:04 pm

Flufflonsdale MOD wrote:I need an offet front sprocket for an EFE with a 1200 Bandit rear wheel. Running a 530 pitch Chain.Thanks

one of the kwakers runs a 3/8 offset as standard.....spline is the same as Suzuki....

have a look on JT sprockets website ..http://www.jtsprockets.com/

by **Flufflonsdale MOD** » Sun Mar 24, 2013 7:48 pm

Looking to use a 17t front and whatever the rear is tht came with bike.

by **arnout** » Sun Mar 24, 2013 8:49 pm

this topic has been discussed many times before on various forums..
http://www.oldskoolperformance.com/foru ... =10&t=4362

by **FBJ admin** » Sun Mar 24, 2013 9:22 pm

If u go 530 17 font 43 rear