AirCooledSuzuki

Posted: **Sat Feb 23, 2013 1:58 pm**

Gsx1100efe output shaft. Must be nice condition. These are different to kat and et motors. Also need head nuts. The ones that hold the head down. All twelve for either a efe. Et or kat. Thanks Fbj

Posted: **Sat Feb 23, 2013 2:23 pm**

think ive got some head nuts off a 750 et ???

Posted: **Sat Feb 23, 2013 2:28 pm**

They might be the same. Can you post a pic of them please

Posted: **Sun Mar 03, 2013 5:58 pm**

is one still after an out put shaft ? might have head nuts too do you need anything else from gearbox it's efe was good till rod went through cases

Posted: **Sun Mar 03, 2013 6:02 pm**

Hello bud. Really need a good asap. Will ya post a pic of the spline and front sprocket mounting end please

Posted: **Sun Mar 03, 2013 6:47 pm**

will
do tomorrow

Posted: **Mon Mar 04, 2013 6:00 pm**

took sprocket off today to take pic the splines are quite worn sorry about that

have got the 8 long domed nuts but not the copper washers or plain nuts

AirCooledSuzuki

bits needed please

bits needed please

Re: bits needed please

Re: bits needed please

Re: bits needed please

Re: bits needed please

Re: bits needed please

Re: bits needed please