Draw Thru Turbo EFE For Sale
Posted: Wed Nov 20, 2013 9:47 amOk So the holiday has been and gone .. 
work is slow so needs must when the devil drives
but that does not mean i will give it away price is based on time of year , economy, and for a hassle free sale
For Sale my 1984 Suzuki EFE...Draw Thru Turbo.
Basic Spec Very Low Mileage Cases...Stock Head Cams ..
1177cc Forged Pistons ,running 8,5:1 CR..
Garrett T3 wizzy bang on Modified Mr Turbo Header’s and Up Pipe..
38mm Wastegate. New HSR42 Carb.. .
Welded Crank , Straight Cut Gears , Heavy Duty Clutch Back Plate, Lock-Up Clutch , Quick Access Cover ,Undercut gearbox...
Motor has less than a 1000 miles on it since build... Busa Wheels, JMC Arm, Hagon Shock "Nearly New"...Radial Front End...
Original Unmolested Wiring Loom all Stock Lights and Indicators .Proper Clocks and Tacho....
"This is a Proper Naked Bike not an imitation"....
Bike is currently running dump pipe as pics but there is also a stubby can to replace it for the faint hearted ......
Made 160 BHP at 5 PSI on superpi55..will go over 200BHP at higher boost...I ran it 3 times up the strip at Bulldog 2012...netting a lazy foot shifted 9.98 & 148MPH...............
It is not MINT. But it is very clean and tidy...taxed and moted ....£3850.00...
I my take another Large Hamamatsu product at £1000 in part ex....NO TEST PILOTs OR TYRE KICKERs....Warwickshire .....Del Possible at Competitive Rate....
work is slow so needs must when the devil drives
but that does not mean i will give it away price is based on time of year , economy, and for a hassle free sale For Sale my 1984 Suzuki EFE...Draw Thru Turbo.
Basic Spec Very Low Mileage Cases...Stock Head Cams ..
1177cc Forged Pistons ,running 8,5:1 CR..
Garrett T3 wizzy bang on Modified Mr Turbo Header’s and Up Pipe..
38mm Wastegate. New HSR42 Carb.. .
Welded Crank , Straight Cut Gears , Heavy Duty Clutch Back Plate, Lock-Up Clutch , Quick Access Cover ,Undercut gearbox...
Motor has less than a 1000 miles on it since build... Busa Wheels, JMC Arm, Hagon Shock "Nearly New"...Radial Front End...
Original Unmolested Wiring Loom all Stock Lights and Indicators .Proper Clocks and Tacho....
"This is a Proper Naked Bike not an imitation"....
Bike is currently running dump pipe as pics but there is also a stubby can to replace it for the faint hearted ......
Made 160 BHP at 5 PSI on superpi55..will go over 200BHP at higher boost...I ran it 3 times up the strip at Bulldog 2012...netting a lazy foot shifted 9.98 & 148MPH...............
It is not MINT. But it is very clean and tidy...taxed and moted ....£3850.00...
I my take another Large Hamamatsu product at £1000 in part ex....NO TEST PILOTs OR TYRE KICKERs....Warwickshire .....Del Possible at Competitive Rate....
