1135 efe engine

by **steveywhite** » Sat Feb 16, 2013 5:18 pm

have been told its a 1225 but cant confirm £600

by **Duckndive** » Sat Feb 16, 2013 7:52 pm

steveywhite wrote:have been told its a 1225 but cant confirm £600

measure it then...not hard with some oil and a decent marked syringe...

by **FBJ admin** » Sat Feb 16, 2013 8:21 pm

Or pop the head off for people to inspect :-)

by **steveywhite** » Sat Feb 16, 2013 8:26 pm

Duckndive wrote:
steveywhite wrote:have been told its a 1225 but cant confirm £600

measure it then...not hard with some oil and a decent marked syringe...

kettle n biccies??? pop up n help me mate

by **Duckndive** » Sun Feb 17, 2013 3:11 pm

get hold of a decent syringe thats marked in MLs

This is easier to do on No 1 or No 4 cylinder

Set piston at TDC.....and add oil up to bottom of spark plug hole...

right now turn piston to BDC and add more oil up to bottom of spark plug hole again ...."but measure acuratly how much oil you put in this time"

this fig is the size of the cylinder .. 8-)

.so this fig x 4 = engine size....

by **Sweary Bob** » Sun Feb 17, 2013 5:10 pm

Sorry but engine cc is Swept volume + combustion volume multiplied by number of cylinders.
Don't mean to "arsey" but if he wants to know the cc, he needs to do it right.

by **steveywhite** » Sun Feb 17, 2013 6:13 pm

selling as an 1135 whats fast lol £500 .. it was running on amal 38 mm carbs

by **Captain Chaos** » Sun Feb 17, 2013 6:51 pm

Sweary Bob wrote:Sorry but engine cc is Swept volume + combustion volume multiplied by number of cylinders.

since when?

by **FBJ admin** » Sun Feb 17, 2013 7:14 pm

Dont know bore an stroke of efe. 1074 motor is 72mm x 66mm so area of a circle is pie r squared = 4.072 per cyl area x that by 66 = 268 x that by 4 = 1075 :-)

im on a phone so havent included units :-)

hopefully you get my drift

by **Duckndive** » Sun Feb 17, 2013 7:26 pm

Sweary Bob wrote:Sorry but engine cc is Swept volume + combustion volume multiplied by number of cylinders.
Don't mean to "arsey" but if he wants to know the cc, he needs to do it right.

Dont meen to be Pedantic :roll:

but since when ????

Engine Size cc or cubic inches is Swept Volume....bore x stroke.............