My new turbo Kat project

by **FBJ admin** » Sat Jan 19, 2013 1:16 pm

I know most people just cut the middle mount of the hangers, I'm thinking of doing the same and using hefty 5mm plate for the other two mounts, what your thoughs on that guys? as you can see on this pic, taken from my stock E, the middle bracket is close to the stock swingarm, I'm using a Bandit one.

by **FBJ admin** » Sat Jan 19, 2013 1:18 pm

This is with the hangers mocked up, can't really spot the new brackets in place because I want to make sure they clear the bandit arm, my arm is at Strangewayz house, not the end of the world as it will all be home soon,

by **FBJ admin** » Sat Jan 19, 2013 1:19 pm

Another

by **FBJ admin** » Sat Jan 19, 2013 1:29 pm

This is a efe rear master cyl

by **FBJ admin** » Sat Jan 19, 2013 1:30 pm

this is a Katana master cylinder, my frame has had the mounting removed, any ideas of a cool way of mounting one?

by **DEANOTEK** » Sat Jan 19, 2013 6:46 pm

If you look on my photos, you can still use the Kat rear master cylinder set up, & still use the cut out on the frame. Look where i've positioned my efe hangers & do away with that middle mounting plate,.. no need for it really. Just make sure you use some good thickness mounting lugs (8mm, 1/4").

by **FBJ admin** » Sat Jan 19, 2013 6:51 pm

the master cyl mount on mine has been removed, I will need to make a new one :shock:

by **DEANOTEK** » Sat Jan 19, 2013 6:57 pm

There we go..

by **FBJ admin** » Sat Jan 19, 2013 7:01 pm

Your bike is so mint mate :-)

I love it, cheers for the close up,

by **FBJ admin** » Fri Jan 25, 2013 10:13 am

Really excited. Gettiing all my bits back tomorrow. Sligbt change of plan. Going to be able to do a dry build then think about getting everything powder coated. Want to sort lock stops and rear master cyl the crack on :-)