My new turbo Kat project

by **FBJ admin** » Tue Sep 17, 2013 7:10 pm

Its all fitted nice. Got clearanc where needed. Just feed, return and wastegate to plumb in.

by **FBJ admin** » Tue Sep 17, 2013 7:10 pm

Another

by **FBJ admin** » Wed Sep 18, 2013 5:58 pm

Had to take drastic measures tonight. Starting here. The spacers you can see on the lhs of the swingarm are 6mm thick. Going to machine 5mm from them and add it to the other side.

by **FBJ admin** » Wed Sep 18, 2013 5:59 pm

Taking 5mm from this and adding to the other side and 3mm from the cush drive

by **FBJ admin** » Wed Sep 18, 2013 6:00 pm

This is what the top hat spacers look like.

by **FBJ admin** » Sun Sep 22, 2013 5:06 pm

Managed to fit the clocks and ign today. Just had to modify the stock clock mounting bracket and have two spacers made

by **FBJ admin** » Sun Sep 22, 2013 5:07 pm

I also fitted and drilled the electrics tray. If anyone wants one they are recommended. See stevea.

by **FBJ admin** » Tue Sep 24, 2013 9:57 am

Spacers all sorted. Moving the swingarm over 5mm and the wheel a further 5mm. Effectively moving the wheel over by 10mm

by **stockcar** » Tue Sep 24, 2013 7:52 pm

not sure the blue pillion seat works.................. :mrgreen:

by **FBJ admin** » Tue Sep 24, 2013 9:21 pm

Ha ha. But the wife will like it :-)