wifes Kat rebuild due to crash

by **FBJ admin** » Sun Nov 24, 2013 2:02 pm

Checked all the valves are sealing well. They are

by **FBJ admin** » Sun Nov 24, 2013 2:03 pm

I then used a 6mm bolt to pull out the cam follower shafts

by **FBJ admin** » Sun Nov 24, 2013 2:05 pm

I always lay these out in the order they were removed. To ensure they go back together the same

by **FBJ admin** » Sun Nov 24, 2013 2:06 pm

Luckily i already have one of these

by **FBJ admin** » Sun Nov 24, 2013 2:06 pm

Valve stem seals removed

by **spondonchris** » Sun Nov 24, 2013 4:17 pm

You are a busy boy!

by **FBJ admin** » Sat Nov 30, 2013 2:49 pm

Did a bit more today. Head torqued. Dodgy rubbers replaced. Cams fitted and timed up. All threads were good

by **FBJ admin** » Sat Nov 30, 2013 7:21 pm

Cam timing done

by **FBJ admin** » Sat Nov 30, 2013 7:22 pm

Tappets done. I recommend these tools. Awesome

by **FBJ admin** » Sat Nov 30, 2013 7:23 pm

Top ends done, cases tomorrow :-)